Whether you're trying to get Wi-Fi out to a shed, across a large property, or just into that one dead-spot room, there are a few solid ways to extend your coverage. The right solution depends on your distance, obstacles, and how much cabling you're willing to run.

Option 1: Mesh Wi-Fi System

A mesh system uses multiple nodes that work together to blanket your property in Wi-Fi. Instead of one router trying to do everything, each node picks up where the last one left off.

• Best for: Homes, medium-sized properties, and multi-level buildings
• Range: Typically 30–100+ acres depending on the system
• How it works: One node connects to your router/modem, additional nodes are placed throughout the property
• Pros: Easy to set up, seamless roaming between nodes, no dead zones
• Cons: Nodes need power at each location; performance can drop if nodes are too far apart without a wired backhaul

The Expansion Roam 30 Acre Wi-Fi Pack is purpose-built for this — designed to work with Starlink and NBN and cover large rural properties.

Option 2: Wireless Bridge (Point-to-Point)

A wireless bridge creates a dedicated wireless link between two fixed points — for example, your house roof and your shed roof. It's like running an invisible ethernet cable through the air.

• Best for: Getting connectivity to a shed, barn, or outbuilding 50m–1km+ away
• Range: Up to several kilometres with the right equipment
• How it works: One unit on each end, both mounted outdoors with line of sight between them
• Pros: Very reliable, high speed, no physical cable run required between buildings
• Cons: Requires line of sight; both ends need power; slightly more complex to set up

The Reyee RG-RAP6202(G) is a great option for this, and can be paired with a bridge unit for a robust house-to-shed link.

Option 3: Running an Ethernet Cable

If you can physically run a cable between locations, this is the most reliable option. A wired connection is always faster and more stable than wireless.

• Best for: Sheds, granny flats, or outbuildings within ~100m
• How it works: Outdoor-rated ethernet cable (Cat6 or better) runs from your router/switch to the remote location, where you plug in an access point or switch
• Pros: Maximum reliability and speed, no interference
• Cons: Requires trenching or conduit if going underground; limited to ~100m per cable run without a switch in between

Option 4: Outdoor Access Point

An outdoor access point mounts externally and broadcasts a strong Wi-Fi signal across a wider area than a standard indoor router.

• Best for: Large yards, outdoor entertaining areas, farms, and properties needing wide outdoor coverage
• How it works: Connects via ethernet to your existing network and broadcasts Wi-Fi outdoors
• Pros: Weatherproof, high-powered, designed for long-range outdoor coverage
• Cons: Still needs an ethernet cable run to the mounting location

Which Option Is Right for You?

Need Help Choosing?

Every property is different. Get in touch with us and we'll help you design the right setup for your situation — whether it's a simple mesh upgrade or a full property-wide network.